Flat surfaced screws for the bottom.

Home Forums Synthino XM Support Flat surfaced screws for the bottom.

This topic contains 1 reply, has 2 voices, and was last updated by  Michael 3 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #339

    Rosskonian
    Participant

    Hello,

    Does anyone have a link to some smooth or flat surfaced screws to use in the bottom of the Synthino XM? It’s nice that the unit came with rubber feet to attach, but the round-headed screws are placed in the exact spot where you would want to stick the rubber feet, the ideal position for stability. Flat or smooth level headed screws for the bottom that are even with the surface would allow the feet to go right over the screws for a nice stable position. Does anyone have a link to some screw that could be ordered online and delivered to the US?

    #340

    Michael
    Keymaster

    I can assure you that the device is perfectly stable with the feet placed just inside the screws. Flat head screws would not be flush with the acrylic surface, though. They would need to be countersunk into the acrylic. I think the acrylic is probably too thin to drill out the holes for countersunk screws, but you can give it a try.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.